The modem router will assign addresses within this specified range to its clients. To use the DHCP server function of the modem router, you must configure all computers on the LAN to obtain an IP Address automatically.įollow the steps below to configure DHCP server.ģ.Select DHCP to enable the DHCP function and select DHCP Server.Ĥ.Specify the IP Address Pool, the start address and end address must be on the same subnet with LAN IP. You can configure the modem router to act as a DHCP server to assign IP addresses to its clients. The function prevents hosts on a local network from receiving traffic for a multicast group they have not explicitly joined.Ħ.You can configure the modem router’s Second IP and Subnet Mask for LAN interface through which you can also access the web management page.ħ.Leave the rest of the default settings as they are.Ĩ.Click Save to make the settings effective.ġ.2. IGMP snooping is the process of listening to IGMP (Internet Group Management Protocol) network traffic. The subnet mask together with the IP address identifies the local IP subnet.ĥ.Keep IGMP Snooping enabled by default. If the IP address conflicts with another device in your local network or your network requires a specific IP subnet, you can change it.įollow the steps below to change your IP address.ġ.Visit, and log in with the account you set for the router.Ģ.Go to Advanced > Network > LAN Settings page and select IPv4.ģ.Type in a new IP Address appropriate to your needs.Ĥ.Select the Subnet Mask from the drop-down list. The LAN IP address together with the Subnet Mask also defines the subnet that the connected devices are on. The modem router is preset with a default LAN IP 192.168.1.1, which you can use to log in to its web management page. Back up and Restore Configuration Settings.Chapter 13 Specify Your Network Settings.Make Xbox Online Games Run Smoothly by UPnP.
Manage the Router via TP-Link Tether App.Chapter 1 Get to Know Your Modem Router.
0 kommentar(er)
